Control independently the direction and speed of up to four independent channels using the Reglo ICC peristaltic pump, each with its own program: start, stop, dispense, reverse, aspirate, and calibrate. The independent channel calibration ensures high accuracy and reproducibility by minimizing the tube-to-tube difference.
Using the keypad or your PC via USB, you can create complex pumping or precision dispensing sequences while working within a flow range of 0.0001 to 43 mL/min per channel. Control up to eight pumps at once by daisy-chaining the RS-232 connectors.
General
Ismatec, established in 1964, is now a leading reference in peristaltic pumps thanks to its offer of high-precision pumps.
The Reglo ICC is an innovative and easy-to-use advantageous peristaltic pump, embedding the latest technologies to provide a reliable and accurate flow:
- 1 up to 4 independent channels: each channel can be individually set to a different flow rate and/or rotational direction.
- Independent channel calibration minimizes the tube-to-tube differences resulting in the best calibration accuracy possible in a multichannel peristaltic pump.
- Choose between 6, 8, or 12 rollers to adjust the level of pulsation and flow range of the pump: more rollers means less pulsatility, and a lower flow rate. Choose 12 rollers for very low pulsatility!
Controlling your pump has never been so easy, using either the digital interface on the pump or through RS-232 connection with your computer. It is even possible to control up to 8 pumps at the same time!
Operating modes
Use the pre-programmed operating modes to create complex time-based experiments:
- Flow rate: continuous operation at a set rate and direction
- Volume over time: dispensing a desired volume over a desired time
- Volume: dispensing a desired volume at a set flow rate
- Time mode: dispensing for a set time duration with a set flow rate
- Volume with pause: dispensing a set volume over multiple cycles with a defined pause time in between
- Time with pause: dispensing for a set time duration over multiple cycles with a defined pause time in between
- Calibration: allows each channel to be calibrated for dispensed fluid volume accuracy
Tubing & Flow range
You should always use Ismatec three-stop tubing with this pump.
| |
Flow range (mL/min per channel) |
| Tubing ID (mm) |
6 rollers |
8 rollers |
12 rollers |
| 0.13 |
0.0002 to 0.14 |
0.0002 to 0.11 |
0.0001 to 0.093 |
| 0.51 |
0.0019 to 1.9 |
0.0017 to 1.7 |
0.0016 to 1.6 |
| 0.57 |
0.0024 to 2.4 |
0.0021 to 2.1 |
0.0019 to 1.9 |
| 0.64 |
0.0030 to 3.0 |
0.0026 to 2.6 |
0.0024 to 2.4 |
| 0.95 |
0.0064 to 6.4 |
0.0056 to 5.6 |
0.0050 to 5.0 |
| 1.02 |
0.0073 to 7.3 |
0.0063 to 6.3 |
0.0056 to 5.6 |
| 1.42 |
0.013 to 13 |
0.011 to 11 |
0.0094 to 9.4 |
| 1.75 |
0.019 to 19 |
0.016 to 16 |
0.013 to 13 |
| 1.85 |
0.021 to 21 |
0.017 to 17 |
0.014 to 14 |
| 2.54 |
0.033 to 33 |
0.027 to 27 |
0.019 to 19 |
| 2.79 |
0.036 to 36 |
0.031 to 31 |
0.021 to 21 |
| 3.17 |
0.043 to 43 |
0.035 to 35 |
0.024 to 24 |
Content
1x Reglo ICC peristaltic pump drive
1x Reglo ICC peristaltic pump head
1x Power supply
1x User manual
Specifications
| Compatible tubing |
Ismatec three-stop tubing |
| Dimensions |
218 x 125 x 170 |
| Motor type |
Stepper motor (1 per channel) |
| Power |
100 to 240 VAC, 50/60 Hz |
| Speed range |
0.1 to 100 rpm, 0.01 rpm resolution |
| Flow rate |
0.0001 - 43 mL/min (per channel) |
| Accuracy |
+/- 1% |
| Channels |
2, 3 or 4 |
| Rollers |
6, 8 or 12 |
| Interfaces |
USB 2.0, Mini-B, RS-232 |
| Protection rating |
IP30 |
| Weight |
2.7 kg |
| Power consumption |
30 W |
| Differential pressure |
1.0 bar (14.5 psi) |
Documentation
? Ismatec Reglo ICC peristaltic pump manual
? Ismatec Reglo ICC peristaltic pump brochure
