Bartels Mikrotechnik

mp-cv Check Valve for Bartels Micropumps

Product SKU:: BT-MP-CV

Support by a team of engineers & PhDs

Support by a team of engineers & PhDs

Support by a team of engineers & PhDs

£39.30

Bulk Pricing:

Buy in bulk and save

Current Stock: 6

Quantity:

Available immediately

Ask an expert

Adding to cart… The item has been added

Complete Your Setup

Use the checkboxes to select the products you need.

Bartels Mikrotechnik

mp-cv Check Valve for Bartels Micropumps

£39.30

Decrease Quantity of undefined

Increase Quantity of undefined

General
Content
Specifications
Documentation

General

Whereas standard ChipShop connectors only accept soft-walled tubing, this set of connectors allows connecting any 1/16" OD rigid tubing to a ChipShop chip.

Suitable for rigid tubing (PTFE, PEEK, etc.) with an OD of 1/16" (1.6 mm). Manufactured in blue TPE, max. pressure of 3.2 bar with a 1/16" OD PEEK tubing.

Plugs to block unused ports are also available in our shop.

Bartels Mikrotechnik

mp-damper for Bartels Micropumps

The mp-damper is made to reduce pulsations in the flow generated by the Bartels BP7 and mp6 micropumps. General Get a more even flow rate by reducing its pulsatility! The mp-damper was designed to...

£25.30

Bartels Mikrotechnik

mp-f Filter for Bartels Micropumps

Protect your Bartels micropumps from dust and particles, filter porosity 20 - 60 µm. General Protect your fluidic systems from particles by connecting this filter upstream of your Bartels micropump...

£53.10

mp-mf Mounting Frame for Bartels BP7 Micropumps - Darwin Microfluidics — Add to Cart The item has been added

Bartels Mikrotechnik

mp-mf Mounting Frame for Bartels Micropumps

A mounting frame for BP7 and mp6 micropumps. General Insert a BP7 or mp6 micropump in this mounting frame to easily fix the pump in your integrated system. Content 1x mp-mf mounting frame for Bartels...

£6.50

Bartels Mikrotechnik

mp-bt Bubble Trap for Bartels Micropumps

A bubble trap to remove bubbles from water-based solutions while using Bartels micropumps. General Remove bubbles from your flow stream using Bartels micropumps. The bubble trap must be used with a...

£43.50

Bartels BP7 - Tubing Micropump - Darwin Microfluidics — Choose Options

Bartels Mikrotechnik

Bartels BP7 Micropump

Bartels BP7 micropump is a piezoelectric pump designed for handling liquids or gases in a wide range of applications. Ultra-compact and lightweight, it integrates easily into your microfluidic system...

£49.60

	Active valves				Passive valve
	Takasago 2/2	Memetis 2/2	Festo 3/2	Bürkert 3/2	Check valve mp-cv
Available type	Normally closed	Bistable	Normally closed		PSU
Principle	Shape memory alloy		Solenoid		Prevents backflow
Reaction time	600 ms	40-140 ms	6-13 ms	3 ms	/
Pressure range	Low pressures < 1 bar		-1 to 7 bar	-1 to 2 bar	Opening pressure: <35 mbar Max back pressure: 500 mbar
Advantages	Small, light, cost-effective	Low internal volume, small, light, low power comsumption	Fast reaction time, cost-effective	Media separated, fast reaction time, high chemical resistance	Leakage rate <20 µL/hr for DI water (at 500 mbar)
Compatible driver and bundle	ValvedriverT ValvebundleT	ValvedriverM ValvebundleM	ValvedriverF ValvebundleF	ValvedriverB ValvebundleB	/
Max nb of valves on the Multiboard2	2	1	2		/

Dimensions (length x wrench)	21 mm x 5.5 mm
Materials	Silicone, PSU
Fluidic connections	Hose olive, length 5.6 mm for tubing with internal diameter 1.3 mm
Cracking pressure	Typically < 35 mbar
Max. back pressure	500 mbar
Leakage rate	<20 µL/h for DI water (at 500 mbar)

mp-cv Check Valve for Bartels Micropumps

Bulk discount rates

Complete Your Setup

A passive check valve to prevent backflows when your Bartels BP7 or mp6 micropump is switched off.

General

Content

Specifications

You Might Also Like

Ask An Expert

Subscribe to our newsletter

Preferences