L100-1S-2 Precision Peristaltic Pump

DG-A (6 rollers)

0.00025-48 mL/min

Up to 8 channels

Not stackable

Cartridges: POM

Rollers: Stainless steel

3-stop tubing 13#, 14#, 0.5*0.8, 1*1, 2*1, 2.4*0.8

3-stop microbore tubing ID ≤ 3.17 mm, wall thickness 0.8-1 mm

0.5*0.8: 0.00025-2 mL/min

1*1: 0.0008-8 mL/min

2*1: 0.0028-28 mL/min

2.4*0.8: 0.0032-32 mL/min

3*1: 0.0048-48 mL/min

DG-B (10 rollers)

0.0002-32 mL/min

Up to 4 channels

Not stackable

Cartridges: POM

Rollers: Stainless steel

3-stop tubing 13#, 14#, 0.5*0.8, 1*1, 2*1, 2.4*0.8

3-stop microbore tubing ID ≤ 3.17 mm, wall thickness 0.8-1 mm

0.5*0.8: 0.0002-1.5 mL/min

1*1: 0.0006-6 mL/min

2*1: 0.0022-22 mL/min

2.4*0.8: 0.0024-24 mL/min

3*1: 0.0032-32 mL/min

YZ1515X-A / YZII15

0.0006-366.7 mL/min

1 channel

Not stackable

Housing: PESU

Rollers: Stainless steel

Standard tubing without stoppers, wall thickness of 1.6 mm

Tubing sizes: 13#, 14#, 19#, 16#, 25#, 17#, 18#

13# (0.8 mm ID): 0.0006-6.3 mL/min

14# (1.6 mm ID): 0.0025-25 mL/min

19# (2.4 mm ID): 0.0042-41.7 mL/min

16# (3.2 mm ID): 0.0077-76.7 mL/min

25# (4.8 mm ID): 0.016-160 mL/min

17# (6.4 mm ID): 0.026-266.7 mL/min

18# (7.9 mm ID): 0.036-366.7 mL/min

YZ1515X-B

0.0006-244.3 mL/min

1 channel

Not stackable

Housing: PESU

Rollers: Stainless steel

Standard tubing without stoppers, wall thickness of 1.6 mm

Tubing sizes: 13#, 14#, 19#, 16#, 25#, 17#, 18#

13# (0.8 mm ID): 0.0006-4.2 mL/min

14# (1.6 mm ID): 0.0025-16.7 mL/min

19# (2.4 mm ID): 0.0042-27.8 mL/min

16# (3.2 mm ID): 0.0077-51.1 mL/min

25# (4.8 mm ID): 0.016-106.7 mL/min

17# (6.4 mm ID): 0.026-177.6 mL/min

18# (7.9 mm ID): 0.036-244.3 mL/min

YZ2515X / YZII25

0.016-266.7 mL/min

1 channel

Not stackable

Housing: PESU

Rollers: Stainless steel

Standard tubing without stoppers, wall thickness of 2.4 mm

Tubing sizes: 15#, 24#

15# (4.8 mm ID): 0.016-160 mL/min

24# (6.4 mm ID): 0.026-266.7 mL/min 

DG15-24

0.009-300 mL/min

2 channels

Not stackable

Cartridges: POM

Rollers: Stainless steel

Standard tubing without stoppers

Tubing sizes: 16#, 25#, 17#

16# (3.2 mm ID): 0.009-90 mL/min

25# (4.8 mm ID): 0.024-183.3 mL/min

17# (6.4 mm ID): 0.04-300 mL/min

DG15-28

0.003-46 mL/min

2 channels

Not stackable

Cartridges: POM

Rollers: Stainless steel

Standard tubing without stoppers, addition of slip-on tubing stops required

Tubing sizes: 13#, 14#, 0.5*0.8, 1*1, 2*1, 2.4*0.8, or microbore tubing ID ≤ 3.17 mm, wall thickness 0.8-1 mm

ID ≤ 3.17 mm, wall thickness 0.8-1 mm: ≤75 mL/min

0.5*0.8: 0.003-3.2 mL/min

1*1: 0.013-10 mL/min

2*1: 0.03-46 mL/min

2.4*0.8: 0.05-46 mL/min

13# (0.8 mm ID): 0.007-3.8 mL/min

14# (1.6 mm ID): 0.027-18 mL/min

FG15-13

1 channel

Not stackable

Housing: IXEF

Rollers: PA6

Standard tubing without stoppers, wall thickness of 1.6 mm

Tubing sizes: 13#, 14#, 19#, 16#, 25#, 17#, 18#

FG25-13

1 channel

Not stackable

Housing: IXEF

Rollers: PA6

Standard tubing without stoppers, wall thickness of 2.4 mm

Tubing sizes: 15#, 24#

0.01 rpm between 0.01 and 10 rpm

0.1 rpm between 10 and 100 rpm

• Speed control mode
• Flow rate mode: the pump runs continuously at the set flow rate

0.01 µL/min to 999 L/min

Select the flow rate unit among µL/min, mL/min and L/min.

• Start/stop control (switch signal)
• Direction control (switch signal)
• Speed control: 0-5V, 0-10V, 4-20 mA, 0-10 kHz through the included external control module

RS485 interface, Longer or Modbus protocol.

The communication parameters (address, baud rate, parity, stop bit) can be set through the pump keypad.

Set the running time (13 options), the pump stops automatically after the desired operating time.

Operating parameters are saved automatically.

When powered up, the pump parameters will resume to the parameters before switch off.

3-stop tubing

ID ≤ 3.17 mm, wall thickness 0.8-1 mm

Standard tubing with slip-on tubing stops

ID ≤ 3.17 mm, wall thickness 0.8-1 mm

DMD15-13-B

DMD15-13-D

BZ15-13

BZ25-13