Specifically designed for peristaltic pumps, this damper reduces flow pulsation in microfluidic systems.
Available for different soft-walled tubing sizes, this medical damper is recommended for medical and pharma applications.
General
Use this damper to smooth out flow rate oscilations generated by peristaltic pumps and other flow control systems. This device effectively suppresses pulsations and improves flow rate accuracy. Its pulsation suppression rate can reach more than 95%.
Compatible with different soft-walled tubing sizes from 0.8 to 9.6 mm ID, this damper has a PSU base and a PC cover.
Simply connect the output side of your peristaltic pump to the damper and obtain a smooth flow rate from its output. Follow the instructions below for reliable efficiency.
- The tubing diameter of the output end should be smaller than that of the input end.
- The length of output tubing shall be more than 30 cm.
- The fluid level at the outlet port shall be higher than that of the damper itself.
Replacement films available: Replacement Film for Fluid Pulse Damper (pack of 5). Other material combinations can be found on our webshop:
Content
1x Fluid pulse damper
Specifications
| Type |
Medical |
| Base material |
PSU |
| Cover material |
PC |
| Film material |
HTV Silicone |
| Barb connectors material |
SS316 |
| Autoclavable |
Yes (doesn't need to be disassembled) |
| Compatible tubing sizes |
13# (0.8 mm ID), 14# (1.6 mm ID), 19# (2.4 mm ID), 16# (3.2 mm ID), 25#/15# (4.8 mm ID), 17#/24# (6.4 mm ID), 18#/35# (7.9 mm ID), 36# (9.6 mm ID) |
See the documentation tab for damper dimensions and more specifications.
Documentation
Fluid pulse damper user guide and technical specifications
