The Droplet Generator with Single Cross - 80 µm nozzles Fluidic 912 is a microfluidic chip designed for precise droplet generation in scientific applications. It features eight identical droplet generator channels per chip, each with a nozzle size of 80 µm. Fine volume selection is possible since each channel can be controlled independently via two flows—a continuous and a disperse phase—giving you direct control over droplet production for various research needs.
General
Droplet generator chip Fluidic 912 features eight identical droplet generator units with a nozzle size of 80 μm on one chip. Droplet generator chips Fluidic 912 provides eight identical droplet generator units with a nozzle size of 80 μm on one chip. The continuous phase is introduced through one Mini Luer inlet, which separates into two channels. Operation of one unit of Fluidic 912 therefore requires a microfluidic pump with the ability to control two individual flows, one for the continuous and one for the disperse phase. To learn more about droplet generation check our droplet generation booklet in the attachments or watch the video below.
Features & Benefits
- Eight Droplet Generator Units: The chip has eight identical channels, so researchers can run parallel processes or replicate tests with ease.
- Precise 80 µm Nozzles: Every channel uses an 80 µm nozzle for consistent droplet size in all experimental runs.
- Two-Channel Flow Control: Use two individual flows per droplet unit for direct control over both the continuous and disperse phases of your experiment.
- Mini Luer Interface: Standardized connections allow easy integration with most microfluidic systems.
- Material and Surface Options: Choose between PC and Topas materials and select surface treatment to suit various reagents and protocols.
This droplet generator chip is designed for labs that need to create droplets with controlled size and frequency. It works by using precisely machined nozzles and dedicated flow controls for both phases. This helps ensure the generation process is repeatable, even during extended runs or when working with critical mixtures.
The chip fits into microfluidic workflows in medical, chemical, or biological research. The transparent construction lets users visually inspect flow and droplet formation, and the standardized Mini Luer interface makes setup easy. With two independent flows for each droplet unit, users can finely tune droplet properties for a wide range of applications.
Applications
The Droplet Generator with Single Cross - 80 µm nozzles Fluidic 912 is well suited for:
- Microfluidic research experiments
- Biological sample partitioning
- Droplet-based chemical synthesis
- Pharmaceutical formulation screening
- Diagnostics and encapsulation studies
Content
1x Droplet Generator with Single Cross - 80 µm nozzles Fluidic 912
Specifications
| SKU | CS-10001333 | CS-10002125 | CS-10001688 | CS-10001985 |
| Design element | Droplet generation | Droplet generation | Droplet generation | Droplet generation |
| Material | PC | Topas | PC | Topas |
| Material chip body | mcs-PC 13 | mcs-COC 16 | mcs-PC 13 | mcs-COC 16 |
| Material chip lid | mcs-foil 042 (PC; 175 µm; Tg 145°C) | mcs-foil 011 (Topas; 140 µm; Tg 78°C) | mcs-foil 042 (PC; 175 µm; Tg 145°C) | mcs-foil 011 (Topas; 140 µm; Tg 78°C) |
| Color | Transparent | Transparent | Transparent | Transparent |
| Interface type | Mini Luer interface | Mini Luer interface | Mini Luer interface | Mini Luer interface |
| Surface treatment | Not treated | Hydrophilized | Hydrophilized | Not treated |
| Membrane | no membrane | no membrane | no membrane | no membrane |
Documentation
Droplet Generator with Single Cross - 80 µm nozzles Fluidic 912 datasheet
Click to read more information about Droplet Generator with Single Cross - 80 µm nozzles Fluidic 912 information.
Click to read an application note about the Droplet Generator with Single Cross - 80 µm nozzles Fluidic 912.
Check the chemical compatibilities for this product here:
Polycarbonate - Chemical Compatibility Chart
Topas - Chemical Compatibility Chart
