Stainless steel connectors to connect your tubing to your PDMS microfluidic chips, perfect for use with silicone or Tygon microfluidic tubing.
Reusable and easily installable.
General
Make a reliable connection between a PDMS chip and soft-walled tubing with these stainless steel connectors.
- Material: 304 stainless steel
- Autoclavable, reusable
- Recommended use: tubing to chip connections with silicone or Tygon tubing (see the table below for tubing ID correspondence)
- Suitable for punched holes in PDMS chips
- Length: 15 mm
- Blunt tip (90° cut)
Choose between packs of 20 or 100 units of stainless steel couplers, each 15 mm long.
These fitted stainless steel fluidic couplers are used to connect your soft-walled tubing to your PDMS device, according to the following table:
| Coupler gauge |
Coupler OD |
Coupler ID |
Tubing ID range |
Puncher size |
| 16G |
1.65 mm |
1.20 mm |
1.2 to 1.6 mm |
1.5 mm |
| 18G |
1.24 mm |
0.85 mm |
0.85 to 1.2 mm |
1.0 mm, 1.2 mm |
| 20G |
0.89 mm |
0.58 mm |
0.6 to 0.85 mm |
0.75 mm |
| 23G |
0.64 mm |
0.33 mm |
0.4 to 0.6 mm |
0.5 mm |
| 25G |
0.51 mm |
0.25 mm |
0.3 to 0.45 mm |
0.5 mm |
Tips:
- Always choose the coupler size with the closest OD above your soft-walled tubing ID
- These values only apply for durometer Shore A, 15 sec up to 80 (Tygon ND 100-80).
Content
20x or 100x Stainless steel straight couplers
Specifications
| Material |
304 stainless steel |
| Coupler gauge sizes |
16G, 18G, 20G, 23G, 25G |
| Shape |
Total length 15 mm
Blunt-ends (90° cut)
|
