Bartels Mikrotechnik

mp-Driver Pump Driver

Product SKU:: BT-MP-DRIVER

Support by a team of engineers & PhDs

Support by a team of engineers & PhDs

Support by a team of engineers & PhDs

£60.90

Bulk Pricing:

Buy in bulk and save

Current Stock: 2

Quantity:

Available immediately

Ask an expert

Adding to cart… The item has been added

Complete Your Setup

Use the checkboxes to select the products you need.

Bartels Mikrotechnik

mp-Driver Pump Driver

£60.90

Decrease Quantity of undefined

Increase Quantity of undefined

General
Content
Specifications
Documentation

General

Whereas standard ChipShop connectors only accept soft-walled tubing, this set of connectors allows connecting any 1/16" OD rigid tubing to a ChipShop chip.

Suitable for rigid tubing (PTFE, PEEK, etc.) with an OD of 1/16" (1.6 mm). Manufactured in blue TPE, max. pressure of 3.2 bar with a 1/16" OD PEEK tubing.

Plugs to block unused ports are also available in our shop.

Bartels Mikrotechnik

mp-Lowdriver Pump Driver

Bartels mp-Lowdriver controller is a compact pump driver for BP7 and mp6 micropumps. It enables integration into system electronics or on a PCB. Pump parameters can also be easily adjustable...

£60.90

Bartels Mikrotechnik

mp-Highdriver4 Pump Driver

Bartels mp-Highdriver4 is a multi-pump driver capable of controlling up to four BP7 or mp6 micropumps simultaneously. Pump parameters are easily adjustable (frequency, amplitude, signal shape) using...

£170.60

Bartels Mikrotechnik

mp-Highdriver Pump Driver

Bartels mp-Highdriver controller is a compact pump driver for BP7 and mp6 micropumps. It enables integration into system electronics or on a PCB. Pump parameters can also be adjusted easily...

£65.30

Bartels Mikrotechnik

mp-valvedriverB for Bartels Multiboard

Use the mp-valvedriverB to control Bürkert 6724 valves from the Multiboard2. General The mp-valvedriverB is a driver used to control up to 2 Bürkert 6724 valves through the Bartels Multiboard and

£89.70

mp-x Controller - Darwin Microfluidics — Add to Cart The item has been added

Bartels Mikrotechnik

mp-Labtronix Controller

The mp-Labtronix controller gives access to the full range of parameters to control Bartels micropumps. This is the perfect system for advanced testing, or if you are not familiar with electronics...

£987.50

Dimensions	10.5 x 20.5 x 7.4 mm
Compatible controller	mp-Multiboard2 (I2C interface)
Power supply	2.5 - 5.5 VDC (5 V recommended for optimized performance)
Current consumption	avg. 30 mA at 5 V
Pin arrangement	DIL 14; horizontal 2.54 mm, vertical 7.62 mm
Amplitude range	85 - 250 Vpp
Frequency range	25 - 226 Hz
Signal form	Similar to rectangular

mp-Driver Pump Driver

Bulk discount rates

Complete Your Setup

Bartels mp-Driver controller is a compact pump driver for BP7 and mp6 micropumps. It enables integration into system electronics or on a PCB. Pump parameters can also be adjusted easily (frequency, amplitude, signal shape) using the mp-Multiboard2 evaluation board.

General

Content

Specifications

Documentation

You Might Also Like

Ask An Expert

Subscribe to our newsletter

Preferences