Bartels Mikrotechnik
FluidCube Switch Extension Board for Bartels MicropumpsProduct Results will show here!
Worldwide Express Shipping
Delivery in 1-3 days for products in stock
Simplified Purchasing
Easily request a quote and track your orders.
Outstanding Support
Support by a team of Engineers and PhDs (Inhouse)
Accessories and consumables for this product
Whereas standard ChipShop connectors only accept soft-walled tubing, this set of connectors allows connecting any 1/16" OD rigid tubing to a ChipShop chip.
Suitable for rigid tubing (PTFE, PEEK, etc.) with an OD of 1/16" (1.6 mm). Manufactured in blue TPE, max. pressure of 3.2 bar with a 1/16" OD PEEK tubing.
Plugs to block unused ports are also available in our shop.
FluidCube Base is the board every FluidCube setup starts from. It takes care of system control, communication and the link to Bartels FluidicStudio, the software in which you set up and run every connected pump, sensor and extension board.
The system is modular. You start with the Base alone and add a FluidCube Sense, Switch or Scale extension board when the application needs analytical sensing, valve control or more pump channels. Each extension board carries its own STM32 controller and needs the Base to run.
The Base drives up to 3 micropumps, one per driver channel. Pump amplitude, frequency and signal shape depend on the driver chip fitted for each pump, and driver chips are not included: order one mp-Driver, mp-Lowdriver or mp-Highdriver per pump (see Complete your setup below).
1x FluidCube Base
1x FluidCube Pump Cable
1x USB-C cable
1x Syringe with Luer-to-barb adapter
Pump driver chip and micropump not included.
| System role | Central control and communication hub |
| Microcontroller | ESP32 |
| Extension board architecture | STM32-based extension boards |
| Software | Bartels FluidicStudio |
| Compatible extensions | FluidCube Sense, FluidCube Scale, FluidCube Switch |
| Pump control | Up to 3 micropumps, one per driver channel |
| Pump parameters | Amplitude, frequency and signal shape, set by the selected driver chip |
| Driver chip | Not included |
| Multiplexing | Supports multiplexed fluidic configurations |
| Power and data interface | USB-C |
| Power supply | 5 V DC, 500 mA |
| Board dimensions | 110 x 110 x 29 mm (4.33 x 4.33 x 1.14 in) |
| Dimensions including feet | 110 x 110 x 37 mm (4.33 x 4.33 x 1.46 in) |
Bartels Mikrotechnik
FluidCube Switch Extension Board for Bartels Micropumps
Bartels Mikrotechnik
FluidCube Scale Extension Board for Bartels Micropumps
Bartels Mikrotechnik
FluidCube Sense Extension Board for Bartels Micropumps
Bartels Mikrotechnik
Pressure Control Kit with FluidCube for Bartels Micropumps
Bartels Mikrotechnik
Air Control Kit with FluidCube for Bartels Micropumps
Get the latest updates on new products and upcoming sales
Prices, taxes and delivery depend on your country.
Your cart is empty
Your setup is waiting for its first component. Pumps, flow sensors, chips, tubing and fittings: start here.
Bartels Mikrotechnik
mp-Lowdriver Pump DriverBartels Mikrotechnik
mp-Lowdriver Pump DriverBartels Mikrotechnik
mp-Lowdriver Pump Driver