HNP Mikrosysteme

F-MI0 Inline Filter for HNP Pumps

Product SKU:

Support by a team of engineers & PhDs

Support by a team of engineers & PhDs

Support by a team of engineers & PhDs

£191.70 - £617.70

Current Stock:

Quantity:

Ask an expert

Adding to cart… The item has been added

General
Content
Specifications
Documentation

Whereas standard ChipShop connectors only accept soft-walled tubing, this set of connectors allows connecting any 1/16" OD rigid tubing to a ChipShop chip.

Suitable for rigid tubing (PTFE, PEEK, etc.) with an OD of 1/16" (1.6 mm). Manufactured in blue TPE, max. pressure of 3.2 bar with a 1/16" OD PEEK tubing.

Plugs to block unused ports are also available in our shop.

Housing

Sealing material

3 options for this product

F-MI0 Inline Filter for HNP Pumps

SKU: PM-F-MI0-s-f8-10

Stainless steel

Kalrez

£209.00

Available immediately

F-MI0 Inline Filter for HNP Pumps

SKU: PM-F-MI0-s-e1-10

Stainless steel

£191.70

Available immediately

F-MI0 Inline Filter for HNP Pumps

SKU: PM-F-MI0-y-f8-10

Alloy C22

Kalrez

£617.70

Available immediately

IDEX Health & Science

Inline 10-32 Filter

Inline filters are used to prevent your microfluidic chip from being clogged because of particles in your liquids. These filters, manufactured in PEEK, are fully biocompatible and can be mounted...

£86.30 - £86.70

IDEX Health & Science

Inline 1/4-28 Filter

This inline filter prevents dust and particles from clogging your microfluidic devices. Easily connect it to 1/16" or 1/8" OD rigid tubing thanks to its 1/4-28 fittings. Filter pores size of 2 µm or...

£28.80 - £39.90

IDEX Health & Science

Replacement Frit for Inline Filter (pack of 5)

Replacement frits for inline filters, manufactured in PCTFE and PEEK. Filter pore size of 0.5 µm or 2 µm. Sold in packs of 5 units. General A set of replacement frits in PCTFE/PEEK for inline filters...

£61.60 - £61.90

Bartels Mikrotechnik

mp-f Filter for Bartels Micropumps

Protect your Bartels micropumps from dust and particles, filter porosity 20 - 60 µm. General Protect your fluidic systems from particles by connecting this filter upstream of your Bartels micropump...

£53.10

HNP Mikrosysteme

mzr-2521X1 Micro Annular Gear Pump with Controller

mzr-2521X1 micro annular gear pump from HNP Mikrosysteme generates low pulsation, high precision flow from 15 µL/min to 9 mL/min (minimum dispensing of 0.25 µL). The integrated motion...

£1,867.20 - £2,175.10

Type	inline filter
Liquid temperature range	-10 ... +140 °C (-50 ... +150 °C)
Differential pressure range	max. 5 bar (72.5 psi)
Operating pressure	max. 20 bar (290 psi)
Internal volume	0.3 mL (0.02 in³)
Dimensions	Ø 14 x 34 mm (Ø 0.551 x 1.339 in)
Fluid connection	1/4-28 UNF
Pore size	10 µm
Filter area	1.3 cm² (0.2 in²)
Weight	approx. 32 g

F-MI0 Inline Filter for HNP Pumps

See All Availability

An inline filter with 10 µm mesh to prevent particles from damaging your HNP micro annular gear pump. Manufactured in 316L stainless steel or alloy C22, with seals in Kalrez or EPDM to ensure the widest chemical compatibility.

General

Content

Specifications

Documentation

You Might Also Like

Ask An Expert

Subscribe to our newsletter

Preferences