Whereas standard ChipShop connectors only accept soft-walled tubing, this set of connectors allows connecting
any 1/16" OD rigid tubing to a ChipShop chip.
Suitable for rigid tubing (PTFE, PEEK, etc.) with an OD of 1/16" (1.6 mm). Manufactured in blue TPE, max.
pressure of 3.2 bar with a 1/16" OD PEEK tubing.
Plugs to block unused ports are also available in our shop.
See All Availability
Use the filter to narrow your search
AMC pump head for Innofluid peristaltic pumps, designed for low flow rates.
Available with 6 or 10 rollers and 1, 2, 3, 4, 5, 6, 8, 10, and 12 channels, with free silicone tubing included.
General
The new AMC pump heads are designed for low flow rates, ranging from 0.2 µL/min up to 65 mL/min, depending on the tubing size, and from 1 to 12 channels.
It can be mounted on LabV series pump drivers, with a maximum recommended motor speed of 150 rpm. The cartridges allow an easy change of the tubing, and occlusion can be finely adjusted on each cartridge for better performance.
Each pump head is available with 6 or 10 rollers: while reducing the maximum flow rate, 10 rollers allow lower flow rates and less pulsatility.
1 meter of 2*1 mm (2 mm ID x 4 mm OD) is included with each channel.
Pump head
Compatible tubing
Speed range
Flow rate (0.1-100 rpm)
AMC (6 rollers)
ID: 0.13 - 3 mm
Wall thickness: 0.8 - 1.0 mm
≤ 150 rpm
0.005 - 65 mL/min
AMC (10 rollers)
0.0002 - 48 mL/min
Content
1x AMC pump head
1x 1m of 2*1 (2 mm ID, 4 mm OD) 3-stop peristaltic tubing per channel
Cartridge to be used in Innofluid AMC pump heads.
General
These replacement cartridges are compatible with Innofluid AMC pump heads. They are used to hold the tubing in place within the peristaltic...
The DG15-24, DG15-28 and DG15-48 pump heads from Longer are multichannel heads for medium to low flow rates.
Available with 4 or 8 rollers and 2 or 4 channels, free silicone tubing included...
YZ1515X pump head for Longer peristaltic pumps. Based on an automatic tubing retention mechanism, this pump head allows using a wide range of tubing dimensions and formulations without stoppers.
Free...
The KZ25 from Longer is a high flow rate pump head for up to 6000 mL/min, with a fast tubing loading mechanism. With stainless steel rollers, PPS compression block and a transparent housing in PC, it...
BZ series pump heads are designed for high reliability. Thanks to their fixed occlusion, they are perfectly dimensioned to each tubing size to provide the highest accuracy.
Free silicone tubing...
Now:
(Inc. VAT/Tax)
MSRP:
Was:
Now:
211.40€
MSRP:
Was:
Ask An Expert
Ask Our Team
We will follow up with you via email within one working day
Please fill in the following form:
!
Subscribe to our newsletter
Get the latest updates on new products and upcoming sales
